Aasimon.org Wiki

Roomba 560 from iRobot is a vacuumcleaning robot.

Here it is seen running.

And here it is seen “sleeping” in its docking station. The orange light shows that it is recharging its battery.

Roomba takes up a little of your time now and then, when it is time to clean it.
Most of its joints can be disassembled, so hair and dust can be removed.
This cleaning process is the only “user time” needed to run Roomba. It takes approximately 15 minutes 2-3 times a week to do it.

The Roomba has a tendency to fold carpets. This however is not a problem, since it can unfold them again, when cleaning from the opposite direction.

Wires on the floor seem to be a bit of a problem. Roomba winds up in them, and tends to drag them along with it, worst case, making things drop to the floor. This problem calls for rather untraditional solutions, as the one shown above, where the wire to a floorlamp has been taped onto the pole, thus running in mid air.

Door mattes usually come in dark gray or black colours. This is a problem to Roomba, since its cliff sensors works by sending light onto the surface on which it is running, and interpreting on the reflection. A black matte therefore makes Roomba think it is about to dive off cliff.
To solve this mattes in lighter gray can be used.
Another matte problem shows itself, when the matte is a lightweight matte (non rubber). Here Roomba tends to push the matte around, instead of vacuuming it. We have solved this problem by sticking the matte to the floorboards using tesafix.
The above image to the left illustrates our front door matte, which has a light enough shade of gray for Roomba to work with. The right one shows our sticky mattes.

Some furnitures has legs not exactly high enough for Roomba to run under. This can easily be solved, using leg extensions